THG-8 type magnetic suction pipe all-position automatic welding machine
THG-8 type magnetic suction pipe all-position automatic welding machine is the latest product jointly developed by Tianjin Huigong Automation Equipment Co., Ltd., domestic universities and users.
Key words:
THG-8 type magnetic suction pipe all-position automatic welding machine
Classification:
Hotline:
Product Details
The THG-8 type magnetic suction pipe full-position automatic welding machine is the latest product jointly developed by Tianjin Huigong Automation Equipment Co., Ltd., domestic universities and users. It integrates a variety of cutting-edge intelligent welding technologies, customized Finnish Kemppi full-digital welding power supply, with MIG, 1-MIG pulse and double pulse functions, advanced full-position four-axis car design, independent operation of the main machine and wire feeder, exquisite and elegant, small and portable, it is convenient for site management and transportation between projects. Can achieve carbon steel, stainless steel, alloy steel, low temperature steel and other materials welding, pipe diameter of 190mm or more can be applied, excellent high and low temperature environmental adaptability. Widely used in oil, natural gas, pipeline workshop prefabrication, gas pipeline outdoor automatic welding, heat pipe network and other industries, for customers to achieve good economic benefits, has been widely recognized and praised.
1. Applicable scope of equipment
Suitable for oil, natural gas pipelines, thermal pipelines, municipal pipeline welding, etc.
Suitable for welding wire diameter: Φ0.8-Φ1.6mm.
Applicable pipe diameter: DN190mm mm or more, applicable wall thickness: 5-100mm.
Applicable welding wire form: solid core wire, flux cored wire.
Welding method: MIG/MAG.
Suitable process scope: horizontal welding, horizontal welding, vertical welding, overhead welding and all-position 5G welding of pipelines.
Applicable material: carbon steel, stainless steel, alloy steel, low temperature steel, etc.
Applicable welds: various pipe section welds, such as pipe-pipe welds, pipe-elbow welds, pipe-flange welds.
2. Device driving mode
Control mode: microelectronic PCB board high-definition LCD screen wireless remote control
Travel drive: motor reducer transmission
Straight pendulum/angular pendulum: stepper motor high precision ball screw high precision linear slide
Welding gun lifting: stepper motor high precision screw high precision linear slide rail
3. Equipment description
Constant torque motor drive, and with quadrature encoder can keep the positioning precision and speed constant of crawl welding.
With the angle sensor control, the 360-degree intelligent partition is realized, and the corresponding welding parameters are automatically called.
Intelligent angle pendulum function, regardless of wall thickness, wall thickness, groove ring weld or fillet weld can achieve excellent welding quality.
Using high-definition color touch screen interface, can realize the touch screen welding parameters real-time editing input, storage and call. Real-time display of welding position.
Combined with the WiseFusion intelligent fusion expert program of Finland Kemppi company, the welding arc starting function is optimized, so that the arc starting is smooth and the success rate is high.
Small and portable, high degree of integration, exquisite and generous, integrated storage and return, easy to move and transport.
High degree of intelligence, less dependence on labor, to ensure the unity and reliability of welding parameters.
Automatic welding and manual welding arbitrary switch to meet the welding needs of various working conditions.
According to the special requirements of users, welding procedures and upgrades can be customized.
Overview of working principle and structure
The pipe is fixed and the welding trolley is used to walk on the pipeline or the corresponding track to realize the all-position intelligent welding of the pipeline. The welding process adopts high-efficiency and low-cost CO2 gas protection or pulse gas protection.
The set of equipment is composed of power control system, intelligent robot, wireless remote controller, welding gun and matching cable, and the whole machine can realize integrated homing storage.
The control system is THG-8 type. There are two swing modes of straight swing and angular swing. Click and switch on the display screen of the wireless remote controller. The welding torch is fixed on the welding torch clamping regulator. The up and down, left and right, front and rear positions of the welding torch and the welding torch angle can be adjusted by the remote controller so that the welding torch can fall at the most suitable position for workpiece welding. During welding, the swing speed, width and left and left and right pause time can be adjusted by the wireless remote control.
Welding power supply and wire feeding system selection of stereotyped products, the company selects domestic and foreign first-class welding power supply for customized matching, if the customer chooses other brands, should be clearly informed in the contract, by the company design supporting.
Host parameters:
Four-axle fully enclosed trolley
| Model | THG-8 |
| Operating voltage | Rated Voltage DC12-35V Typical DC24 Rated Power:<100W |
| Current control range | Greater than or equal to 80A less than 500A |
| Voltage control range | 16V-35V |
| Straight swing speed | 0-60 continuously adjustable |
| Straight pendulum width | 2mm-30mm continuously adjustable |
| Left Timing | 0-3s continuously adjustable |
| Right Timing | 0-3s continuously adjustable |
| angular swing speed | 0-60 continuously adjustable |
| Straight pendulum width | 2mm-30mm continuously adjustable |
| Welding speed | 50-1000 mm/min, stepless speed regulation |
| Applicable pipe diameter | More than DN190mm |
| Applicable wall thickness | 6-100mm |
| Welding wire (φmm) | 0.8-1.6mm |
| Overall dimension (L * W * H) | Welding trolley 300mm * 380mm * 240mm |
| Weight (KG) | Welding trolley 15Kg |
Power Parameters
| Model | power control system | |
| Power supply voltage | 3~50/60Hz | 400V-15%...+20% |
| Rated power | 60. 100 16KVA | 22.1KVA 16.0KVA |
| Fuse (delay) | 35A | |
| Temporary load rate (40 ℃) | 60. 100. | 450A 350A |
| Welding current voltage range | MIG
| 15A/20V-450A/46V |
| No-load voltage | MIG/MAG/Pulse | 80V |
| No-load power | 100W | |
| Power factor (maximum current) | 0.9 | |
| Efficiency (maximum current) | - | 88% |
| Storage temperature range | -40 ℃ ~ 60 ℃ | |
| EMC grade | A | |
| Grid minimum short circuit total strategy Ssc * | 5.5MVA | |
| Enclosure protection class | IP23S | |
| Overall dimension | Length * Width * Height | 590mm*230mm*430mm |
| Voltage supply for auxiliaries | 50VDC/100W | |
Honor
Enterprise style
Previous Page
Next Page
Previous Page
Next Page
Related Products
THG-8 type magnetic suction pipe all-position automatic welding machine
THG-8 type magnetic suction pipe all-position automatic welding machine is the latest product jointly developed by Tianjin Huigong Automation Equipment Co., Ltd., domestic universities and users.
TH-500SS Dual-Wire Gas-Shielded Welding
The TH-500SS carrier‑controlled dual‑wire CO₂ gas‑shielded arc welding machine is a new, high‑efficiency dual‑wire welding power source developed by our company through the integration of domestic and international technologies. Its uniquely designed dual‑wire wire‑feeding mechanism ensures lightweight, effortless operation with an air‑cooled torch. Compact in size and light in weight, it is easy to transport.
(TH-6) Automatic Submerged-Arc Welding Machine for Column Circumferential Joints
The automatic submerged-arc horizontal welding machine is a specialized, high-efficiency welding system designed for vertical steel pipe and steel plate horizontal butt joints with deep bevels. It is ideally suited for welding operations on offshore platform risers, pile legs, offshore wind turbine towers, and thick-walled plates.
Customer Message
We will contact you within one working day. Please pay attention to your email.



